Supply Chain · System Thinking
Why suppliers won’t add capacity, and how to make expansion less of a gamble

When a growing economy points to strong future demand for vehicles, vehicle makers want their suppliers to add capacity. Every one of them has to: a vehicle maker can only produce as many vehicles as its slowest supplier can support.
But after a severe downturn, many suppliers become reluctant. They ask for guarantees of capacity utilisation before investing. Vehicle makers, knowing another slump could come at any time, won’t give such guarantees.
The industry ends up in a stand-off. Who will take the risk?
Why suppliers are cautious
Suppliers have learned from experience that a downturn hits them far harder than it hits their customers.
Picture a slump where a vehicle maker’s annual volume dips by 10–20%, and its production stays low for three or four months. What happens down the chain?
- Tier-1 suppliers see production fall to half or less for four to six months, because they also have to work through the stock they built while the vehicle maker was still producing to forecast.
- Tier-2 and tier-3 suppliers see an even deeper, longer drop, perhaps six to nine months at half their normal volume. Some lose half their planned annual business.
During those months, income doesn’t cover fixed costs. Working capital meant for material is spent on salaries and interest. Skilled workers are laid off. When demand recovers, these suppliers can’t restart quickly. They lack both cash and people. Everyone loses, including the vehicle maker, which can’t ramp up until its weakest supplier does.
Seen from the supplier’s side, adding capacity raises fixed costs and shortens how long the business can survive the next slump. Expecting suppliers to “just take the risk” misses the point: no business owner will take a risk that could wipe out the business.
The real problem: depth and length of the dip
Suppliers accept that demand will rise and fall. What they can’t survive is a deep dip that lasts a long time. So the way to reduce their risk is to make dips shallower and shorter as they travel down the chain.
The size and length of the correction at each tier depends mostly on one thing: how much inventory sits between the tiers. The more stock in the pipeline when demand drops, the longer each tier has to stop producing while that stock is used up.
A rough example shows how this works. Say a tier-1 supplier ships 100 sets a day and holds about a month of finished stock. Vehicle demand drops by 20%, to 80 a day, but the supplier hears about it only after three weeks of producing at the old rate. Its month of stock, sized for 100 a day, is now about 600 sets too big, and three weeks of overproduction add roughly 400 more: about 1,000 surplus sets. To work that off while shipping 80 a day, it cuts its own production to around 40 a day for about a month. Its tier-2 supplier, seeing tier-1’s orders, sees a 60% drop, not 20%.
Now the same supplier with about a week of stock, hearing about the drop within days. Its surplus is about 200 sets, cleared in about ten days by trimming production to around 60 a day. Tier-2 sees a 40% dip for a week or two instead of a 60% collapse for a month, and the recovery reaches it within days rather than weeks. That is a dip a business can survive.
And there is a lot of it. Plants that are a few hours or days apart often hold weeks or months of stock between them. Why? Because daily requirements swing wildly. When one part is short, the vehicle maker builds whatever it can, so some parts are suddenly needed at many times their average rate. Suppliers, fearing penalties or losing the business, protect themselves with large stocks of finished goods and raw material. Each tier holds more than the one above it, because each tier above produces in larger batches.
Two things to fix
A pull system across the whole chain tackles both causes of the deep, long dip:
1. The vehicle maker’s lag. If vehicle production follows actual dealer sales (refilling a central finished-vehicle buffer rather than producing to forecast), it can react to a slowdown within days, not months. And since the plant pools demand from all dealers, its daily load on each part becomes much steadier.
2. The stock between tiers. With a steady load, tier-1 suppliers need far less finished-goods stock. If tier-1 also draws its parts daily from designed buffers held by tier-2 (and tier-2 from tier-3), stock at each lower level can fall substantially too.
With less stock in the chain and faster reaction at the top, a fall in demand reaches every tier quickly and in proportion: a modest dip spread over a short period, rather than a collapse that lasts most of a year.
Why kanban hasn’t done this already
Most of the auto industry admires the Toyota Production System and its kanban cards. In theory, kanban from dealers down to the deepest suppliers would achieve this. In practice, very few chains have done it, for two reasons:
- Demand swings widely across weeks, both for vehicles and for individual parts, which makes fixed kanban quantities hard to maintain.
- Implementing kanban across a whole chain takes years, and daily firefighting makes such long efforts hard to sustain.
TOC’s replenishment approach builds on the same flow principle but adjusts buffer sizes automatically as consumption changes (the equivalent of changing the number of kanban cards), and can be put in place between two links in months rather than years.
Suppliers don’t need a guarantee that demand will never fall. They need a supply chain where a fall doesn’t become a collapse.
When the chain carries less stock and reacts within days, adding capacity stops being a bet on the economy. It becomes a manageable business decision.